蜜桃视频app

DeChambeau is not a particularly notable pro 鈥� he鈥檚 won five PGA events in his career, but has yet to place in the Top 10 in a major. In fact, he鈥檚 . Each of the 6-foot-1 college physics major鈥檚 irons and wedges are cut to exactly 37.5 inches, with identical lie and bounce angles. As a result, he swings each one on the same plane.

This is not how most golfers operate, and DeChambeau鈥檚 unique approach has yet to catch on. And it鈥檚 far from the approach that Club Champion takes to try to custom craft the right set of equipment for each individual golfer.

Despite playing golf casually since high school, I鈥檝e never gotten fitted for clubs, despite multiple attempts from friends and former golf course co-workers to get me to try. So I figured I would be a good test case for the average amateur golfer considering taking the plunge and took a recent spin through Club Champion鈥檚 iron fitting process.

The fitters at Club Champion call themselves 鈥渂rand agnostic,鈥� featuring equipment from across the golf industry. My fitter is Adam Hubbard, a former pro at Raspberry Falls, who promptly instructs me to pull my 6-iron out to get a baseline.

This is bad news for me, as that鈥檚 the area of my irons where things start to get squirrelly. Irons are already the weakest part of my game, so much so that I don鈥檛 currently carry anything longer than a 5-iron. But that鈥檚 the club they use to fit, as it鈥檚 right in the middle of the bag.

Using the same Trackman technology that鈥檚 spread like wildfire across professional and amateur baseball, you get instant feedback on everything from club speed and ball speed to launch angle, spin rate, and land angle, as well as any variant in your club鈥檚 path to the ball. The simulator screen may be a somewhat familiar feel for those who have hit in them before, but if you appreciate data like I do, there鈥檚 plenty of new stuff to chew on to help you understand what鈥檚 working in your game.

After a lackluster, inconsistent half dozen shots, I get a look at my ugly results. Club speed: 73.4 mph. Ball speed: 98.4 mph. Average carry: 124 yards. Launch angle: 13.8 degrees. I鈥檝e always had a low shot, but I know the numbers are bad, even for me (it鈥檚 also the first time I鈥檝e swung a club since October).

The building process starts with finding the right shaft for your club speed that will yield the best combination of weight, flex and balance. We try a couple different ones but settle on Accra 70i shafts, one of their heavier offerings in that line. Immediately, my numbers are up across the board

After fine tuning the shaft with a few swings each, we move to trying different club heads. While my current irons are Callaways, I really only landed on them because I play a Callaway ball. I haven鈥檛 swung enough different brands to understand the differences between them, so we try a bunch of different ones. We cycle through the Taylor Made M6s and the Titleist AP1s, before I groove a couple near perfect shots with the Ping G410s. For good measure, we try a Srixon model, but the performance goes the other way 鈥� lower ball speed, lower launch angle, lower spin rate, lower carry, shallower landing angle. The Pings are the winners. My ball speed’s up 10 mph, my average carry more than 30 yards, now that I’m striking the ball consistently. My launch angle and landing angle are dramatically steeper. They鈥檙e the ones in dark blue below (the shorter shots were from the wedges).

Once we鈥檇 settled on the best option, Hubbard tinkered with the loft and lie to optimize the club speed, spin and consistency. I was striking the turf slightly off center, so Hubbard adjusted the head slightly to see if it would help; it didn鈥檛, I actually hit the ball worse. So he adjusted back. There are some variables in a player鈥檚 natural swing that aren鈥檛 worth trying to overhaul, so long as contact is good and results are consistent.

We also hit a couple of wedges, sussing out the best loft and bounce for my particular swing. I鈥檓 not a big divot-taker, so shallower bounce works best, but they鈥檒l walk you through it if you鈥檙e the type of player who fears your wedges more than you embrace them.

Finally, it鈥檚 on to the grips, trying to find the best level of tackiness that will hold up under sweltering humidity without slipping, while also remaining soft enough not to tear your hands up after 18 holes. Hubbard runs through the dozens of options lining the back wall. You鈥檒l no doubt be a bit聽 tired by this point in the process, but it鈥檚 important to get your hands on them and figure out what will work best for you.

All the data can be overwhelming to try to make sense of on the spot, so they both print and email it to you, giving you a chance to sift through everything later. Personally, it was helpful to be able to go back and compare what felt like the best swings to the actual results.

Alright, sure, all that鈥檚 great, but you want to know about price. To start, the hour-and-a-half long iron fitting that I did runs $150 (they are currently running a promotion at the Fairfax location discounting it to $100 through the end of March). A full bag, 3.5-hour irons, woods, driver putter fitting is $350 (currently $175), if you鈥檙e really serious about overhauling your entire bag.

The clubs themselves vary, depending on the components, but it鈥檚 easiest to think of the price this way: whatever the stock cost of the individual club would be at a sporting goods store, that鈥檚 the cost of the club head. Then add the custom shafts, the PURE shaft alignment (which finds the most stable spot where the shaft bends), and the grips separately. The full set of Ping G410 irons we eventually landed on, along with 54- and 60-degree Cleveland wedges, would run just over $1,200 retail, after taxes, if bought stock in stores. The fully customized, fitted set with shafts and grips totaled just under $2,400, nearly twice as much.

So, is it worth it? Club Champion in which eight of the nine participants saw their games improve by an average of 1.7 strokes per play, their drivers gain 21 yards, and their irons gain 13 yards. Those improvements don鈥檛 mean you鈥檙e going to go pro anytime soon, but can be big deal, depending on how seriously you take your game.

I鈥檒l say it was pretty clear after fine tuning my options that I was striking the ball far more consistently, straight with the slightest draw, that I鈥檝e ever hit my six iron. That鈥檚 probably to be expected considering I own second-hand, stock irons that I spent less than $400 to purchase a few years ago. The jump in cost for custom clubs something that obviously doesn鈥檛 make sense for everyone, so it鈥檚 worth considering how important the improved performance is to you and how much you鈥檒l use your clubs. Needless to say, the more you play, the more value you鈥檒l get out of them.